Tensile Fabric Structures International Company

The load bearing in the tension fabric structures can be generalised as follows:
1 The dead load of the architecture membrane structures is very much less than 50 n/m2.
2 Roof live loads are not relevant to tensile fabric structures but there are typically designed for normal loads.
3 Seismic load not applicable because of low mass.
4 Wind [...]

Tension fabric structures may be designed by the designer and build approach or by engineering consultant with specilialized knowledge in this tensile fabric structures technology. Normally architects will provide general parameters and let the tensile membrane specialist to to provide details engineering and connection solution.
Building tensile fabric structures can become problematic when owners and constructors [...]

Tensile fabric structures featured in the Press Release. We are pround that we are recognise tension fabric structures in the market.
This guide is very useful to someone who is new in the tensile fabric structures. This is a good guide for architect, designer and owner.
Click here to read the details: Press Release

This is a preliminary method statement for fabric structures, and therefore the content is set out in a basic format.
The erection statement for architectural fabric structuresthat will accompany this project.
The erection statment for tensile fabric structures is significantly more detailsand comprehensive drawings.

1. Erect steel columns and lift beam / trusses into place;
2. [...]

link here